Getting Started

Hoops are coiled down to half their normal size for shipping. Take care when opening your hoop for the first time. DO NOT attempt to unfold it into a figure-eight shape. Instead, push in on the metal button and slide the tubing apart until the inside tubing comes all the way out. Then, carefully uncoil the hoop.

Insert ONE battery so that the positive end of the battery (the side with a little nub) is facing the plus sign. Only use one battery in your FutureHoop at a time. Inserting more than one battery into your hoop will void the Warranty and is likely to cause damage that is not covered by the Warranty.

With the battery inserted, reconnect the tubing. It will slide until the button hits the hole that signifies the OFF position. Push the metal button and slide the tubing together further to reach the ON position.

Once the hoop is closed and in its ON position the hoop will light up. This will prevent the hoop from coming open while in motion.

You may need to allow your hoop some time to relax into its circular shape. You can do this placing the uncoiled hoop in the ON position, with no battery inside, flat on the ground.