Getting Started

Find the top of your wand by locating the end with a ♥ sticker. This is where the power switch is located. To turn on, push down in the center of the cap and watch as it lights up. Click the wand on and off to advance through the 6 different modes. Each mode will automatically advance to the next pattern every 6 seconds.

If you have any trouble using the power switch, check the cap alignment to make sure the caps are pressed down as far as they can go. If you are using Silicone Contact Caps, look down into the center of the cap where you’ll see a little heart. Push here to activate the power switch.

Face the lights of the wand outward to achieve the best balance while spinning.